🔍
Infusion Mesh is a porous fabric layer used in composite manufacturing to createconsistent flow channels during resin infusion processes. Made from nylon or polyesterin a grid-ike structure, it is placed on the laminate surface to facilitate uniform resindistribution and efficient air removal. This material ensures thorough wet-out of fiberswhile minimizing race-tracking, and is easily removed after curing to reveal a cleansurface finish.

Infusion Mesh

Infusion Mesh is a porous fabric layer used in composite manufacturing to createconsistent flow channels during resin infusion processes. Made from nylon or polyesterin a grid-ike structure, it is placed on the laminate surface to facilitate uniform resindistribution and efficient air removal. This material ensures thorough wet-out of fiberswhile minimizing race-tracking, and is easily removed after curing to reveal a cleansurface finish.

Category:
Material Polyester / Nylon / Polypropylene
Mesh Size 2-10mm
Thickness 0.5-3mm
Color Transparent / White / Black
Width 100-1600mm, Custom available
Length 50-1000m
Air Permeability 200-1000 L/m ·s
Temperature Resistance Polyester:  -60°C to 150°C
Nylon: -60°Cto 180°℃
Polypropylene: -20°Cto 100°℃
Tensile Strength 50-200 MPa
Chemical Resistance Good to epoxy, polyester, vinyl ester